HPS12 air-water heat pump, 12kW

12.1 kW for heating and 12 kW for cooling

VIVAX air-water heat pump split systems are for heating and cooling heating water and heating domestic water.

Additional information >>

SKU: HPS12 Category:

Description

Set HPS12 – 12.1 kW for heating and 12 kW for cooling

 

VIVAX heat pump outdoor unit HPS-41CH120AERI/O3s R32 rated power is 12.1 kW for heating and 12.0 kW for cooling.

Nominal heating capacity A7/W35 (kW) 12.1
COP coefficient 4.95
Nominal cooling capacity A35/W18 (kW) 12
EER coefficient 4
Compressor – Type Double rotor
External Fan – Motor Type DC fan
Number of fans 1
Heat exchanger – type Fin-coil
Refrigerant R32
Amount of refrigerant (kg) 1.84
Sound power level (dB(A)) 64
Device dimensions (mm) 1118x865x523
Package dimensions (mm) 1180 x 890 x 560
Net/gross weight (kg) 112/125
Refrigerant pipe diameter (mm) – Liquid 9.52
Refrigerant pipe diameter (mm) – Gas 15.88
Pipe connection method With nut, without welding
Maximum height difference (m) 20
Maximum pipe length (m) 2-30
Refrigerant replenishment (g/m) 38
Power source 380-415 V / 3 Ph / 50 Hz

The VIVAX heat pump HPS-120HM155AERI/I1H9s is a hydro box in your room with an additional 9 kW heater.

Rated power (kW) 15.5
Expansion tank (primary circuit) – volume (L) 8
Expansion tank (primary circuit) – filling pressure (Mpa) 0.3
Auxiliary electric heater – optional (kW) 3/9
Electric auxiliary heater – power supply – 3 kW 220-240 V / 1 Ph / 50 Hz
Electric auxiliary heater – power supply – 9 kW 380-415 V / 3 Ph / 50 Hz
Total volume of water (L) 5
Room temperature range (˚C) 5 °C ≤ T ≤ 35 °C
Water outlet temperature – cooling (˚C) 5 °C ≤ T ≤ 25 °C
Water supply temperature – heating (˚C) 25 °C ≤ T ≤ 65 °C
Water pump – delivery height (m) 9
Water connection diameter (mm) – heating/cooling R1″
Refrigerant pipe diameter – liquid (mm) 9.52
Refrigerant pipe diameter – gas (mm) 15.88
Safety valve (Mpa) 0.3
Minimum water consumption (m³/h) 0.6
Heat exchanger – type Plate heat exchanger
Sound power level (dB(A)) 43
Device dimensions (mm) 420×790×270
Package dimensions (mm) 525×1050×360
Net/gross weight (kg) 39/45
Power source 220-240 V / 1 Ph / 50 Hz

 

Application Heating + cooling + domestic hot water
Type Split (external unit + hydraulic box)
Refrigerant piping Between the outdoor unit and the hydraulic box
Water pipe Between hydrobox and indoor heating devices
Installation Underfloor heating circuits
Fan coil units
Low temperature radiators
Domestic hot water tank
Additional heat sources (e.g. boilers and boilers)

SPLIT TYPE OUTDOOR PART
The outdoor part absorbs heat from the outside air and transfers it to the interior through the refrigerant piping.
HYDROBOX
The hydrobox heats water with refrigerant from the external unit. The heated water circulates through heating devices such as underfloor heating, radiators, fan coils, as well as the internal coil of the domestic hot water tank.
DOMESTIC WATER TANK
Warm water from the hydro box is circulated through the heating water coil of the domestic hot water tank, heating the domestic hot water inside the tank. As a backup option, electric heaters could be installed in the domestic hot water tanks.
USER INTERFACE
The user interface is connected to the split device via a signal cable. Its main functions are ON/OFF, parameter setting, timer and service parameter setting.

DIAGRAM OF THE SPLIT SYSTEM